The main technical indicators of the 1 chute color sorter machine
(1) Processing capacity
The processing capacity of the 1 chute color sorter machine is the amount of materials that can be processed per hour. The main factors affecting the processing capacity per unit time are the movement speed of the servo system, the maximum speed of the conveyor belt and the purity of the raw materials. The speed of the servo system is fast, and the actuator can be quickly sent to the position corresponding to the impurities, which can increase the speed of the conveyor belt and increase the processing capacity. Otherwise, the speed of the conveyor belt can be reduced. The processing capacity per unit time is proportional to the speed of the conveyor belt. The faster the conveyor belt speed, the greater the output. The processing capacity per unit time is also related to the proportion of impurities contained in the raw material. If there are few impurities, the larger the interval between the two impurities, the longer the response time left for the servo system, and the speed of the conveyor belt can be increased. At the same time, the processing amount per unit time is closely related to the required selection accuracy.
(2) Color selection accuracy
Color sorting accuracy refers to the percentage of impurities selected from raw materials to the total amount of impurities contained. The color sorting accuracy is mainly related to the moving speed of the conveyor belt and the purity of the raw materials. The slower the conveyor belt moving speed, the longer the time between adjacent impurities, the servo system has enough time to remove the impurities and improve the color sorting accuracy. Similarly, the higher the initial purity of the raw material, the less impurities, and the higher the color sorting accuracy. At the same time, the color selection accuracy is also limited by the design of the servo system itself. When there are more than two impurities in the same frame image, only one impurity can be removed, and the color selection accuracy is reduced. The double selection structure is better than the single selection structure.
(3) Take-out ratio
The take-out ratio refers to the ratio of the amount of impurities in the waste selected by the 1 chute color sorter machine to the normal amount of material. The level of the take-out ratio can be adjusted, and the adjustment of the take-out ratio is mainly accomplished by adjusting the power-on time of the actuator. If the take-out ratio is set too high, it will affect the selection rate and processing capacity of the color sorter; if the setting is too low, the selected waste will contain too much normal material, which will cause waste; if it is reprocessed , need to invest a certain amount of manpower and material resources, will cause a lot of trouble and economic losses.
Rice destoner Rice husker Paddy separator Rice whitener Rice grader Rice cleaner Rice polisher