Influence of product quality on the effect of 1 chute color sorter machine

There are many factors that affect the effect of the 1 chute color sorter machine, including the debugging of the color sorter, the selection, placement, and product quality of the color sorter. This paper elaborates the influence of product quality on the color sorting effect of the color sorter, so that the color sorter can work normally.

The product contains a lot of impurities, and the color is very inconsistent, which leads to more gas consumption in production, which increases the gas supply virtually, and at the same time indicates that the air pressure is insufficient. At this time, the sensitivity or production flow must be reduced to ensure that the color sorter can maintain stable air pressure and work properly.

The influence of product quality on the color sorting effect of the 1 chute color sorter machine.

The product contains very little impurities, but the sensitivity of your 1 chute color sorter machine is very low, and the background plate is not adjusted properly, which will lead to a sharp increase in air consumption, large air supply, and insufficient air pressure. On the background board of the secondary color sorter, change the slope height of the background board to ensure the normal operation of the color sorter.

The impurity contained in the product is moderate, the flow rate is also large, and the sensitivity is high. At this point, it is necessary to adjust three aspects, sensitivity, background plate, and gas consumption.

When the air supply pressure of the 1 chute color sorter machine is insufficient, do not panic. Most of the problems are small problems that have nothing to do with the machine itself. A better take-out ratio can be obtained with simple debugging.