Use of rice mill precautions

Release time:

2019-08-06

1. The main and auxiliary machines should be installed securely and reliably. The length and tightness of the transmission belt should be suitable. The rotating and transmission parts should have protective cover devices.

2. Before starting the machine, check whether the technical status of each part of the rice mill is good, then close the inlet insert and open the export insert.

3. After the rice milling machine is running normally, the feeding hopper is gradually filled with rice and the outlet insert plate is gradually opened, and the accuracy of the rice grain, broken rice and broken grain are observed. If not, stop and adjust the spacing of the outlet insert or the rice knife.

4, in the case of precision, broken rice, broken valleys to meet the requirements, try to open the large import plug-in board until full load.

5. Regularly clean up the export of rice machine and keep the export open.

6. If it is found that rice grains and whole rice are mixed in the fine sputum, immediately check whether the rice sifter is damaged or not, and take corresponding measures.

7. During the work, the tightening of the belt and the screw and the bearing temperature and lubrication should be checked frequently. If the operation sound of the rice machine is abnormal, it should be stopped immediately and checked.

8, always pay attention to rice cleaning. Iron, iron nails, bricks and other hard objects should not be trapped in the rice, and wire mesh should be installed in the feed hopper.

Milling machine process and operation and maintenance

Analysis of common failure causes of rice milling machine

Milling machine process and operation and maintenance

Analysis of common failure causes of rice milling machine